=====Self-Canceling Turn Signal Indicator Fix=====
====on the 1973 280SEL (W108) ====
===by ""JeffreyNMemphis""===
===8/12/09===

----
I have not posted in a while and I have new material to contribute and a few minutes to share. That nagging turn signal stalk that would not hold itself when I was signaling a turn finally got some love. Here is the procedure:
----

Remove rubber boot at steering column. The photo shows that the shape of the boot holds itself on, no clips or tabs that might break off.
http://www.peachparts.com/diy/w108turnsignal/01.jpg

http://www.peachparts.com/diy/w108turnsignal/02.jpg

Next, examine the working of the signal indicator to determine if right side or left side (or both) need attention.
http://www.peachparts.com/diy/w108turnsignal/03.jpg

http://www.peachparts.com/diy/w108turnsignal/04.jpg

http://www.peachparts.com/diy/w108turnsignal/05.jpg

Then, gently file the indented location checking frequently until the signal holds on its own. If you file too much the signal will get stuck, then it won't self-cancel.

This was about one-hours worth of labor, maybe two if you are snapping photographs.

Here are the pictures of the filing. Hope this helps. When I was looking for a fix, I found a helpful description. I am visual and photographs help me more than words.
http://www.peachparts.com/diy/w108turnsignal/06.jpg

http://www.peachparts.com/diy/w108turnsignal/07.jpg

[[http://www.peachparts.com/shopforum/showthread.php?t=258868 Discuss this DIY here.]]

**-""JeffreyNMemphis""**
----
CategoryDiy