Additions:
Dave
**__Additional comments and pics from uberwgn__**
Yes, I'd like to say thanks to Lightman as I needed this procedure today to remove the IM to access two troublesome bolts on my leaking fuel shutoff valve.
I'll add a couple of photos a minor contribution to this work. A total of 16 bolts are removed to enable removal of the IM. 14 are the bolts holding the IM, the other two are referenced in the photo below:
14 bolts removed here:
http://www.peachparts.com/diy/e300glowplug/A.jpg
10mm bolt on right is accessed from above. 10mm bolt on left is accessed from below. Manifold is ready to be removed, it's that simple:
http://www.peachparts.com/diy/e300glowplug/B.jpg
I'm going to refresh this o-ring. This is at connection between the pressurized air from the I/C to the EGR valve.
http://www.peachparts.com/diy/e300glowplug/C.jpg
There's a lot of "spatter" from exhaust or oily vapors and one of these connections is leaking. It could be the EGR clamp that's leaking.
[[http://www.peachparts.com/shopforum/showthread.php?t=88574 Discussion of this DIY can be found here.]]
**-""LightMan""**
**__Additional comments and pics from uberwgn__**
Yes, I'd like to say thanks to Lightman as I needed this procedure today to remove the IM to access two troublesome bolts on my leaking fuel shutoff valve.
I'll add a couple of photos a minor contribution to this work. A total of 16 bolts are removed to enable removal of the IM. 14 are the bolts holding the IM, the other two are referenced in the photo below:
14 bolts removed here:
http://www.peachparts.com/diy/e300glowplug/A.jpg
10mm bolt on right is accessed from above. 10mm bolt on left is accessed from below. Manifold is ready to be removed, it's that simple:
http://www.peachparts.com/diy/e300glowplug/B.jpg
I'm going to refresh this o-ring. This is at connection between the pressurized air from the I/C to the EGR valve.
http://www.peachparts.com/diy/e300glowplug/C.jpg
There's a lot of "spatter" from exhaust or oily vapors and one of these connections is leaking. It could be the EGR clamp that's leaking.
[[http://www.peachparts.com/shopforum/showthread.php?t=88574 Discussion of this DIY can be found here.]]
**-""LightMan""**
